Name: Utility knife
Brand: Hatsukokoro
SKU: Hikari-130PT_1.5mm
Price: 995.00 SEK
Availability: InStock

Utility knife

995,00 SEK

VAT included for EU orders .

Hikari-130PT_1.5mm

Utility knife with a 130 mm long blade that is extra thin (1.5 mm)

This model is available in two versions where the blade thickness is slightly different; 1.5 mm vs. 2 mm.
This model has a blade spine that is 1.5 mm thick. The differences in feel and performance are small. The main difference is that the thinner variant has a little more flexibility in the blade.

Steel: Semi-stainless SLD with 2 layers of stainless cladding (HRC: 60-62)
Blade length: 132 mm
Blade height: 31 mm
Thickness at blade heel: 1.5 mm
Thickness at middle of spine: 1.5 mm
Weight: 66 grams
Blade finish: Bright and slightly hazy blade side against the highly polished core steel.
Handle: Mono bubinga

This knife series is the result of close collaboration between Hatsukokoro and one of the largest and most respected knife manufacturers in Seki city, Japan. We are impressed by this knife series with its fine SLD steel, beautiful finish, very thin blades, and excellent price, earning our warmest recommendation.

SLD is a very durable steel that holds its edge for a very long time, especially when not sharpened too smoothly, allowing the edge to retain some serration. We recommend finishing at 1000 to 3000 grit for both sharpness, bite, and long edge retention. SLD is SEMI-STAINLESS, meaning it resists rust well, but is not 100% rust-proof. Over time, the core steel will darken slightly, giving the knife a beautiful contrast between the core steel and the cladding.

Important:
Keep in mind that the edge is hard and thin. Therefore, be careful not to subject the edge to stress, especially sideways. When using a Japanese knife with a thin blade, the edge should always be in motion when cutting. Under no circumstances should you push the blade through an ingredient without the edge being in motion. Nor should you twist or wiggle the blade to pry apart ingredients.

Manufacturer: Hatsukokoro
Model: Petty
Length: 130 mm
Steel: SLD
Semi-rostfritt stål | Rostfri kappa
HRC: 60-62 HRC
Forging:
Handle material: Bubinga

Carbon steel
Carbon steel is not stainless and therefore requires a little more care than stainless steel. Always clean and dry the knife thoroughly immediately after use. This is especially important after cutting acidic foods such as citrus fruits, tomatoes and onions, as the acid can quickly react with the steel.

Do this:

Clean the knife immediately after use.
Wash by hand using the soft side of a dish sponge and a little dishwashing liquid.
Dry the blade thoroughly after cleaning.
For long-term storage, the blade can be protected with a thin layer of tsubaki oil.

Avoid:

Dishwashers.
Leaving the knife in water or allowing it to remain damp.
Leaving food residue, especially from acidic ingredients, on the blade.

Patina, a completely natural oxidation of carbon steel

As carbon steel is used, the blade will gradually change colour and develop a patina. Depending on the foods you cut, it can take on shades of grey, blue, brown and sometimes even almost rainbow-like tones.

Patina is a natural reaction between the steel and food and is not the same as rust. In fact, an established patina provides some protection for the steel and makes the blade less reactive over time.

Rust, on the other hand, should be removed. It is often orange or reddish-brown and may feel rough on the surface of the blade. A patina is normally smooth and is a natural part of owning and using a carbon steel knife.