Sakimaru takobiki

Takobiki

5 495,00 SEK
Skip to product information
Sakimaru takobiki

Takobiki

5 495,00 SEK
VAT included for EU orders .
CHOYO_270TAKO

sakimaru takobiki, single bevel with a 255 mm long blade.

The blade face of this knife has been polished to a mirror finish. After the extensive polishing, a thin protective layer of lacquer is applied to the blade. One might easily think this has to do with hardening, but that is not the case. The lacquer creates a rainbow-like shimmer that can be easily removed with acetone if desired, although it will disappear on its own over time.

This knife is produced in extremely small editions and it is truly top of the line. What particularly distinguishes the knife is that the blade side has a hand-ground kasumi finish while the top part has a mirror polish.

The handle is made of Ho wood with a buffalo horn bolster.

Blade height: 29 mm

Weight: 144 grams

Edge length: 256 mm

Steel: Shirogami#2 with an iron cladding (not stainless)

Finish: Bright mirror finish with hand-ground kasumi.

Specs

  • Manufacturer: Sakai Kikumori
  • Model: Yanagiba
  • Length: 255 mm
  • Steel: Shirogami #2
  • Carbon steel | Iron clad
  • HRC: 61-62HRC
  • Forging:
  • Handle material: Magnolia | Buffelhorn

Care & maintenance

Carbon steel
Carbon steel is not stainless and therefore requires a little more care than stainless steel. Always clean and dry the knife thoroughly immediately after use. This is especially important after cutting acidic foods such as citrus fruits, tomatoes and onions, as the acid can quickly react with the steel.

Do this:

Clean the knife immediately after use.
Wash by hand using the soft side of a dish sponge and a little dishwashing liquid.
Dry the blade thoroughly after cleaning.
For long-term storage, the blade can be protected with a thin layer of tsubaki oil.

Avoid:

Dishwashers.
Leaving the knife in water or allowing it to remain damp.
Leaving food residue, especially from acidic ingredients, on the blade.

Patina, a completely natural oxidation of carbon steel

As carbon steel is used, the blade will gradually change colour and develop a patina. Depending on the foods you cut, it can take on shades of grey, blue, brown and sometimes even almost rainbow-like tones.

Patina is a natural reaction between the steel and food and is not the same as rust. In fact, an established patina provides some protection for the steel and makes the blade less reactive over time.

Rust, on the other hand, should be removed. It is often orange or reddish-brown and may feel rough on the surface of the blade. A patina is normally smooth and is a natural part of owning and using a carbon steel knife.

Shipping information

Shipping
We use UPS for deliveries outside of Sweden.
Orders within Sweden are shipped with DHL or DSV.

Sweden
DSV shipping: SEK 69
Free shipping on orders over SEK 1,000

EU mainland
UPS shipping: €15
Free shipping on orders over €195

Malta & Cyprus
UPS shipping: €30
Free shipping on orders over €500

Norway, Switzerland, Iceland & the UK
UPS shipping: €10
Free shipping on orders over €150

Rest of the world
UPS shipping: €30
Free shipping on orders over €500

More knives in the same series

Yanagiba kengata

Yanagiba kengata

5 495,00 SEK

Takobiki

Takobiki

6 995,00 SEK

Takobiki

Takobiki

5 495,00 SEK

Knife sleeves

Blade protector 15 cm

Blade protector 15 cm

30,00 SEK

Blade guard 20 cm

Blade guard 20 cm

30,00 SEK

Blade guard 25 cm

Blade guard 25 cm

30,00 SEK

Blade guard 30 cm

Blade guard 30 cm

30,00 SEK

Go to whetstones

Knife bags

Knife roll

Knife roll

1 395,00 SEK

Knife bag

Knife bag

395,00 SEK

Knife bag leather

Knife bag leather

1 595,00 SEK

Leather knife sheath

Leather knife sheath

795,00 SEK

Knife roll

Knife roll

495,00 SEK

Knife bag

Knife bag

895,00 SEK

Knife bag

Knife bag

795,00 SEK