Michibiki – uncompromising synthetic stone from Kyoto

Tanaka Toishi (Kyoto, Japan)

Grit: 6000 grit
Content: White aluminum oxide
Weight: 806 grams
Dimensions: 215 x 83 x 25 mm
Type: Soaking stone. Soak 10–15 min before use.

Michibiki is a new, Japanese premium series developed by Tanaka Toishi, the same house that manages the mineral rights to the legendary Nakayama natural stone mine. The series is made for knife enthusiasts seeking uncompromising performance; highest cutting properties, precise feel, and a finish approaching natural stone. Michibiki provides an unusually even, covering, and hazy kasumi on laminated steel, which is rare among synthetic stones.

“These stones consists of the highest performing materials, and nothing is added to the stone that doesnt need to be there.”
Quote: Tanaka san, during our visit to Kyoto (September 2025)

By this, Tanaka means that the recipe is optimized for performance, not price. A high proportion of expensive abrasive grains and a carefully selected binder provide fast material removal, clear feedback, and minimal tendency to "glaze" over. The stone is expensive. The performance is total.

White or Green stone, what should you choose?

• White (WA / White Alumina): All-round, controlled removal, fantastic on stainless steel as the stone provides a clean, even surface and holds its shape well.
• Green (GC / Green Silicon Carbide): More aggressive, bites hard even on hard steels and is known for fast removal and a nice covering kasumi during polishing.

Why?

• WA (white aluminum oxide) is often used in intermediate and finer grits because it cuts quickly but controllably and wears slowly – especially good on stainless steels.
• GC (green silicon carbide, often called "Green Carbon/GC") has harder and sharper grains that remove material quickly, perfect when you want to remove material or enhance contrast in kasumi.

How they feel to use

• Soft but firm feel: Michibiki has a relatively high proportion of abrasive grains and less binder, which provides fast material removal with a stable feel.
• Even scratch pattern: Scratches are quickly blurred between steps, and softer steels are left with an even, hazy kasumi (especially Green/GC).
• Soaking: 10–15 min before sharpening.
• Long-lasting & often larger format than many standard stones, providing a comfortable "platform" and stable angle control.

Recommended choices based on needs

• 320 grit
  Quick thinning and repair of chips. Choose Green GC 320 for maximum material removal or the white WA 320 if you are looking for a slightly "gentler" cut that is still very fast and holds its shape better.
• 1000 grit
  Basic sharpness in the kitchen, daily service:
  - White WA 1000 for a clean, biting basic edge on stainless steel; Green GC 1000 when you want more "bite" and faster work on tougher steels. Green 1000 grit provides incredibly covering kasumi; we at cleancut are completely amazed by the sharpening power and the even kasumi this stone creates.
• 2000–3000 grit
  Polishing of edge and kasumi:
  - White WA 3000 for a clean, dense finish on the edge; Green GC 2000/3000 when you want to combine speed with hazy kasumi on laminated steel.